Bosch Dryer Error E24
⚡ Quick Answer: The Bosch dryer E24 error code indicates an electronics fault in the control system, preventing the appliance from functioning correctly. Symptoms inc... ⚠️ Difficulty Varies
What Does Error E24 Mean?
The Bosch dryer E24 error code indicates an electronics fault in the control system, preventing the appliance from functioning correctly. Symptoms include the dryer stopping abruptly, unresponsiveness to commands, and the inability to resolve simple issues like a blocked lint filter. This error often requires professional repair to diagnose and fix the electronic circuitry involved.
Common Symptoms:
- Dryer stops and displays E24 on the control panel
- Dryer may be unresponsive to normal commands when E24 is displayed
- No simple user‑level issue (e.g., lint filter or blocked hose) resolves the code
Possible Causes
- Electronic system fault in control or related circuitry (high)
How to Fix Error E24
DIY Fix Confirm basic conditions and power cycle
- Turn the dryer off and unplug it from mains power.
- Wait 5–10 minutes to allow the electronics to discharge.
- Plug the dryer back in and attempt to restart a cycle.
- Ensure the lint filter and condenser (if applicable) are clean — although these are not tied specifically to E24, clean components help rule out unrelated issues.
Technician Only Diagnose and repair electronics fault
- Connect diagnostic tools to the dryer to read full fault memory if available.
- Inspect control board and associated wiring/wiring harnesses for signs of failure (burnt components, loose connections).
- Test power supply stability to the control electronics.
- Replace the defective control electronics or relevant board components as identified by testing.
- Reassemble and verify correct operation of dryer cycles without the E24 error.
Parts needed: Control board / main electronics module, Wiring harnesses (as needed)
- If power cycling does not clear the error
- If the code recurs immediately after restarting
- If there are signs of electrical damage (burnt smell, smoke, sparks)
Next step
Choose the next step for E24
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E24 error mean on Bosch dryer?
E24 indicates an electronics fault in the control system, causing the dryer to stop and be unresponsive.
Can I fix Bosch dryer E24 error myself?
You can try power cycling the dryer, but this may not resolve the issue if it’s a deeper electronics fault.
How much does it cost to fix E24 error?
Repair costs range from $150 to $450 or more, depending on the parts and service rates.
When should I call a technician for E24?
Call a technician if power cycling does not clear the error or if you notice signs of electrical damage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!