Bosch Dryer Error E07
⚡ Quick Answer: The Bosch dryer error E07 typically indicates a malfunction related to the heating element. Users may experience no heat during the drying cycle, whic... ✅ DIY Fixable
What Does Error E07 Mean?
The Bosch dryer error E07 typically indicates a malfunction related to the heating element. Users may experience no heat during the drying cycle, which can prevent clothes from drying properly. While specific symptoms for E07 are not documented, it is advisable to check the user manual for your model and consider contacting Bosch support for further assistance or a technician if the issue persists.
Common Symptoms:
- Not documented by official Bosch for dryers
Possible Causes
- Heating Element
- Thermal Fuse
- Wiring Issues
How to Fix Error E07
DIY Fix Check manual and model‑specific resources
- Locate and enter your exact model number on the Bosch Home Appliances support site to see if documentation specific to your dryer variant lists E07.
- Review your user manual’s troubleshooting section to confirm whether E07 is listed with any definition.
- If the code appears along with other symptoms (e.g., no heat, no drum rotation), note these and include them when contacting support.
Technician Only Contact Bosch support or a certified service technician
- Report the E07 code along with the appliance model number and any observed behavior (e.g., display pattern, when the code appears).
- Have the technician access service diagnostics — many Bosch dryers have hidden diagnostic modes that can reveal stored fault codes and sensor readings.
- If needed, use manufacturer diagnostic tools to trace the fault (e.g., controller communication, sensor errors, motor/tach feedback).
Parts needed: Model‑specific control board diagnostic interface, Relevant sensors or drives depending on technician diagnosis
- If the E07 code persists after power cycling and checking basic errors (lint filter, drainage), or accompanied by other malfunction symptoms
Next step
Choose the next step for E07
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Bosch 00440045 |
| voltage_rating | 240V AC |
Common Questions
What does E07 error mean on Bosch dryer?
The E07 error indicates a potential malfunction of the heating element, resulting in no heat during the drying cycle.
Can I fix Bosch dryer E07 error myself?
Yes, check your model's manual for specifics and ensure basic issues like lint filters are clear before seeking professional help.
How much does it cost to fix E07 error?
Repair costs vary based on service call and parts needed; technician diagnosis is usually required.
When should I call a technician for E07?
Contact a technician if the E07 code remains after power cycling and checking for simple issues like lint build-up.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!