Blomberg Dryer Error R06
⚡ Quick Answer: The Blomberg dryer error R06 signifies a malfunction in the heating element, often related to a fault in the moisture or temperature sensor. This erro... ✅ DIY Fixable
What Does Error R06 Mean?
The Blomberg dryer error R06 signifies a malfunction in the heating element, often related to a fault in the moisture or temperature sensor. This error typically occurs during drying cycles, especially in sensor-dry programs, causing the dryer to stop prematurely or fail to heat altogether. Inspecting the sensor wiring and connections is essential to resolve this issue.
Common Symptoms:
- Dryer stops and displays R06 during a drying cycle
- Issue more apparent on sensor‑dry programs
- Drying cycle may halt early or not complete
Possible Causes
- Moisture sensor fault or conductivity sensing issue (medium)
- Sensor wiring connection problem (medium)
How to Fix Error R06
DIY Fix Clean the moisture sensor bars
- Disconnect the dryer from power.
- Open the dryer door and locate the metal moisture sensor bars near the lint filter opening.
- Clean the sensor bars with a damp cloth using mild detergent or white vinegar to remove residue.
- Dry thoroughly and restore power, then test a sensor dry cycle.
Technician Only Inspect sensor wiring and module
- Disconnect power and access the control area behind the front panel.
- Inspect the wiring harness and connections to the moisture/temperature sensor bars for damage or loose connections.
- Test continuity of the sensor and replace the sensor module or wiring if found faulty.
- Reassemble and verify correct operation with a test cycle.
Parts needed: Moisture sensor bars, Sensor wiring harness, Sensor module (if separate)
- If the error persists after cleaning and wiring checks
- If there are signs of electrical damage or burning smells from the control area
Next step
Choose the next step for R06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dryer Moisture Sensor
Detects moisture in clothing so automatic drying cycles can stop at the selected dryness level.
- Typical part-only price
- $10 - $50
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Blomberg 280000123 |
| voltage_rating | 240V AC |
Common Questions
What does R06 error mean on Blomberg dryer?
The R06 error indicates a malfunction in the heating element, often due to a moisture or temperature sensor fault.
Can I fix Blomberg dryer R06 error myself?
Yes, you can try cleaning the moisture sensor bars if the error occurs. Ensure the dryer is unplugged before cleaning.
How much does it cost to fix R06 error?
Repair costs for the R06 error can range from ¥3,000 to ¥15,000 for parts, depending on the model and region.
When should I call a technician for R06?
Call a technician if the error persists after cleaning or if you notice electrical damage or burning smells.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!