Blanco Dishwasher Error i10

⚡ Quick Answer: The Blanco dishwasher error code i10 indicates an issue with the water inlet valve, which may prevent the dishwasher from filling with water. Common c... ✅ DIY Fixable

What Does Error i10 Mean?

The Blanco dishwasher error code i10 indicates an issue with the water inlet valve, which may prevent the dishwasher from filling with water. Common causes include a closed water supply tap, a kinked or damaged inlet hose, or a clogged inlet hose filter. To resolve this issue, ensure the water supply is fully open, inspect the inlet hose for kinks or damage, and clean any filters to remove debris or scale buildup.

Possible Causes

  • Water Inlet Valve
  • Water Supply Line
  • Float Switch

How to Fix Error i10

DIY Fix Check basic water supply and setup

  1. Ensure the water supply tap to the dishwasher is fully open.
  2. Check that the inlet hose is not kinked, bent, or twisted.
  3. Inspect and clean any inlet hose filter or strainers to remove scale or debris.
  4. Verify household water pressure and flow at another tap to ensure adequate supply.

Technician Only Consult BLANCO service and review model‑specific manual

  1. Obtain the exact model number and download the official BLANCO service manual that includes error code definitions.
  2. Check internal sensors and water inlet components according to the documented procedure for that model.
  3. Use diagnostic tools to test inlet valve, pressure sensors, and control board if identified in BLANCO documentation.
🛑 When to Call a Pro:
  • If the error persists after basic water supply and filter checks.
  • If you cannot locate an official BLANCO definition for the code in the model’s manual.
  • If disassembly or electrical testing is required.

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 500-1500 ohms
part_number BLANCO-123456
voltage_rating 120V AC

Common Questions

What does i10 error mean on blanco dishwasher?

The i10 error indicates a water inlet valve problem, preventing the dishwasher from filling with water.

Can I fix blanco dishwasher i10 error myself?

Yes, check the water supply tap, inspect the inlet hose for kinks, and clean any inlet hose filters.

How much does it cost to fix i10 error?

Repair costs vary; diagnosis may incur a service charge depending on the technician.

When should I call a technician for i10?

Call a technician if the error persists after checking the water supply and filters or if electrical testing is needed.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!