Black & Decker Dehumidifier Error LC

⚡ Quick Answer: The Black & Decker dehumidifier LC error indicates a potential malfunction in the water level sensor or a control lock mode. If your unit displays thi... ✅ DIY Fixable

What Does Error LC Mean?

The Black & Decker dehumidifier LC error indicates a potential malfunction in the water level sensor or a control lock mode. If your unit displays this error, it may stop functioning properly. To troubleshoot, check the control panel for any lock icons and attempt to exit lock mode by holding relevant buttons. If the issue persists, try unplugging the unit for several minutes and reconnecting it to see if the error clears.

Possible Causes

  • Water Level Sensor

How to Fix Error LC

DIY Fix Check for control lock / display lock condition

  1. Review your specific Black & Decker dehumidifier’s control panel for a lock or key icon if present
  2. Try holding relevant buttons (e.g., hold power or a combination like up/down) to exit a possible lock mode, referencing your model’s manual
  3. Unplug the unit for several minutes and then reconnect to see if the display clears

Technician Only Contact Black & Decker Customer Support

  1. Record the exact model number and symptoms including when the LC code appears
  2. Contact Black & Decker support via official channels to request error code clarification for your model
🛑 When to Call a Pro:
  • If the code persists after resets and normal use, or if the unit becomes unresponsive

Next step

Choose the next step for LC

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Model number required

Browse by model — no specific failed part is claimed

Model-compatible Dehumidifier parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 300W
component Water Level Sensor
resistance 1-5 ohms
part_number BD-WS-001
voltage_rating 120V AC

Common Questions

What does LC error mean on blackdecker dehumidifier?

The LC error indicates a malfunction in the water level sensor or a control lock mode.

Can I fix blackdecker dehumidifier LC error myself?

Yes, check for a control lock condition and try unplugging the unit for a reset.

How much does it cost to fix LC error?

Repair costs vary by model and region; specific costs are not provided.

When should I call a technician for LC?

Call a technician if the code persists after resets or if the unit becomes unresponsive.

Sources & References

Data last verified: 2026-07-26

User Comments (0)

Share your experience or solution below.

Be the first to comment!