Belling Washing Machine Error E13
⚡ Quick Answer: The Belling washing machine E13 error indicates a leak detected in the base tray, triggering the anti-flood float sensor. This typically occurs when t... ✅ DIY Fixable
What Does Error E13 Mean?
The Belling washing machine E13 error indicates a leak detected in the base tray, triggering the anti-flood float sensor. This typically occurs when the machine stops mid-cycle and may display a leak alarm. Common causes include a damaged door seal, leaking hoses, or a faulty float switch. It is essential to address these issues promptly to prevent water damage and ensure proper machine operation.
Common Symptoms:
- Washing machine stops mid‑cycle and displays E13
- Water detected in base tray beneath machine
- Leak alarm or internal flood protection activation
Possible Causes
- Internal water leak detected in base tray activating anti‑flood/float switch (medium)
- Damaged or leaking door seal, hoses, or connections allowing water into base (medium)
- Faulty or stuck anti‑flood float switch (low)
How to Fix Error E13
DIY Fix Initial leak inspection and base drying
- Immediately stop the wash cycle and turn off water supply.
- Unplug the machine and carefully pull it forward to access the base area.
- Place towels to catch any water and tilt the machine slightly backward to let standing water drain.
- Dry the base tray thoroughly and check for visible water sources around door seal and hoses.
Technician Only Inspect and repair internal leak sources and float switch
- Disconnect the washer from mains and water supply.
- Remove lower front or rear panels to access base tray, hoses, and float switch.
- Inspect and replace damaged door gasket, split hoses, or loose clamps.
- Test the float/anti‑flood switch for correct movement; replace if stuck or faulty.
- Reassemble and run a short test cycle to confirm E13 no longer appears.
Parts needed: door gasket, drain hose, tub‑to‑pump hose, anti‑flood float switch
- If water damage is extensive or source of leak is not visually identifiable
- If electrical components have been exposed to water
- If replacing internal parts is beyond safe DIY practice
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Gasket
Creates a watertight seal around the door to prevent leaks during operation.
- Typical part-only price
- $45 - $110
- DIY difficulty
- Medium
- Estimated time
- 30-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E13 error mean on belling washing machine?
E13 indicates a leak detected in the base tray, activating the anti-flood float sensor.
Can I fix belling washing machine E13 error myself?
Yes, you can inspect for leaks and dry the base area as initial steps.
How much does it cost to fix E13 error?
Repair costs range from $50 to $200+, depending on parts and service rates.
When should I call a technician for E13?
Call a technician if the leak source is not visible or if electrical components are exposed to water.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!