Baumatic Washing Machine Error END

⚡ Quick Answer: The 'End' display on your Baumatic washing machine indicates that the wash cycle has completed successfully. This is a normal message and not an error... ✅ DIY Fixable

What Does Error END Mean?

The 'End' display on your Baumatic washing machine indicates that the wash cycle has completed successfully. This is a normal message and not an error. If the display shows 'End' without any accompanying error codes or flashing lights, it means the machine has finished its program and is ready for you to remove your laundry.

Common Symptoms:

  • Display shows ‘End’ on control panel at the completion of cycle
  • No additional flashing error codes
  • Washing cycle stops and door lock indicator goes off (on some models)

Possible Causes

  • Normal program completion (high)

How to Fix Error END

DIY Fix Understand the ‘End’ message

  1. When the machine completes a wash cycle normally, the display may show ‘End’.
  2. This simply means the selected program has finished.
  3. Turn off or open the machine and remove laundry as usual.

Technician Only No technician action required for standard ‘End’ display

  1. If the machine shows only ‘End’, no fault has occurred.
  2. If there are additional issues (e.g., cycle stops prematurely before rinsing/spinning), further diagnostics may be needed.
🛑 When to Call a Pro:
  • Only contact service if ‘End’ is accompanied by other error codes or if the machine stops prematurely before completing intended wash stages and does not respond to start/reset commands.

Technical Specifications

wattage 150W
component Drain Pump
resistance 10-20 ohms
part_number BAU-PUMP-001
voltage_rating 240V AC

Common Questions

What does END error mean on baumatic washing machine?

'End' means the wash cycle has completed successfully; no errors are indicated.

Can I fix baumatic washing machine END error myself?

Yes, simply recognize 'End' as a normal completion message and remove your laundry.

How much does it cost to fix END error?

There are no repair costs as 'End' is not an error.

When should I call a technician for END?

Call for service only if 'End' is accompanied by other error codes or if the machine stops prematurely.

Sources & References

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!