Bauknecht Washing Machine Error F14
⚡ Quick Answer: The Bauknecht washing machine error F14 indicates a drainage issue, often stemming from a control electronics memory failure. This error typically cau... ✅ DIY Fixable
What Does Error F14 Mean?
The Bauknecht washing machine error F14 indicates a drainage issue, often stemming from a control electronics memory failure. This error typically causes the machine to halt operation during the spin cycle, displaying the F14 code on the screen. Users may also notice unusual sounds during this process. To address this issue, a basic power reset can be attempted, but persistent errors may require professional diagnosis and repair of the control board or EEPROM memory.
Common Symptoms:
- Washing machine stops operation and displays F14 on screen
- Cycle does not proceed beyond error display
- Machine may refuse to start wash cycle
Possible Causes
- Control electronics memory (EEPROM) read/write failure (medium)
How to Fix Error F14
DIY Fix Basic reset and checks
- Turn off and unplug the washing machine from mains power.
- Wait 5–10 minutes to allow residual energy to drain.
- Plug the machine back in and try restarting a wash cycle.
Technician Only Diagnose and repair control electronics
- Verify error code with service diagnostic mode if available.
- Inspect control board and connectors for damage, corrosion or loose connections.
- Test or replace the control board’s EEPROM or entire electronic control module.
Parts needed: Control board (main PCB), EEPROM/Memory chip (if serviceable separately)
- If the error persists after a basic power reset
- If the machine displays additional error codes alongside F14
- If the user is unsure or uncomfortable accessing internal electronic components
Next step
Choose the next step for F14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Bauknecht 481228058300 |
| voltage_rating | 230V AC |
Common Questions
What does F14 error mean on bauknecht washing machine?
The F14 error indicates a drainage issue due to a control electronics memory failure, stopping the machine during the spin cycle.
Can I fix bauknecht washing machine F14 error myself?
Yes, you can try a basic power reset by unplugging the machine, waiting 5-10 minutes, then restarting it.
How much does it cost to fix F14 error?
The estimated cost to repair the F14 error ranges from $150 to $450, depending on parts and labor.
When should I call a technician for F14?
Call a technician if the error persists after a reset, if you see additional error codes, or if you're uncomfortable accessing internal components.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!