Bauknecht Dryer Error F08
⚡ Quick Answer: The F08 error code on your Bauknecht dryer indicates a fault with the humidity or moisture sensor, which can prevent the dryer from starting or cause ... ✅ DIY Fixable
What Does Error F08 Mean?
The F08 error code on your Bauknecht dryer indicates a fault with the humidity or moisture sensor, which can prevent the dryer from starting or cause it to stop shortly after starting. This malfunction typically results in inadequate heating during the drying cycle. To resolve this issue, it's essential to inspect and clean the moisture sensor bars located inside the drum, as well as check for any wiring connection problems.
Common Symptoms:
- Dryer shows F08 and may not start
- Dryer stops shortly after starting
Possible Causes
- Faulty or contaminated humidity/moisture sensor (medium)
- Sensor wiring connection issues (medium)
How to Fix Error F08
DIY Fix Clean and inspect moisture sensor bars
- Unplug the dryer from power.
- Locate the metal moisture sensor bars inside the drum (often near the lint filter).
- Clean the sensor bars thoroughly with a soft cloth and mild cleaner to remove residue.
- Dry completely before powering the dryer back on.
Technician Only Check and repair sensor wiring or replace moisture sensor
- Disconnect power and open the dryer access panels.
- Inspect wiring harness and connectors to the moisture sensor for continuity and damage.
- Repair or replace sensor wiring as needed.
- Replace the moisture sensor module if cleaning and wiring checks do not resolve F08.
- Test dryer operation after repair.
Parts needed: Moisture sensor assembly, Wiring harness/connectors
- If error persists after cleaning sensors and verifying wiring.
- If internal components (wiring, sensor module) show damage beyond simple user-level fixes.
Next step
Choose the next step for F08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dryer Moisture Sensor
Detects moisture in clothing so automatic drying cycles can stop at the selected dryness level.
- Typical part-only price
- $10 - $50
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Heating Element |
| resistance | 10-20 ohms |
| part_number | BAK-HEAT-001 |
| voltage_rating | 240V AC |
Common Questions
What does F08 error mean on Bauknecht dryer?
The F08 error indicates a malfunction in the humidity sensor, affecting the dryer’s operation.
Can I fix Bauknecht dryer F08 error myself?
Yes, you can clean the moisture sensor bars and check the wiring connections.
How much does it cost to fix F08 error?
The repair cost is medium and varies based on parts and labor needed.
When should I call a technician for F08?
Call a technician if the error persists after cleaning or if there is visible damage.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!