Asko Oven Error E10
⚡ Quick Answer: The Asko oven E10 error, also known as ERR10, signals a Pyrolysis Temperature Error. This typically occurs during the self-cleaning cycle when the ove... ✅ DIY Fixable
What Does Error E10 Mean?
The Asko oven E10 error, also known as ERR10, signals a Pyrolysis Temperature Error. This typically occurs during the self-cleaning cycle when the oven fails to reach the necessary high temperature. Common symptoms include the display of ERR10, premature termination of the cleaning cycle, and the oven not achieving the required pyrolytic temperatures. Potential causes may involve a malfunctioning safety thermostat, blocked ventilation affecting airflow, or incorrect settings. Immediate user actions can help troubleshoot before seeking professional repair.
Common Symptoms:
- Oven displays ERR10 during or upon attempting a pyrolytic self-clean cycle
- Pyrolytic cleaning does not start or completes prematurely
- Oven fails to reach target pyrolytic temperatures
Possible Causes
- Safety thermostat malfunction during pyrolysis cycle (medium)
- Blocked ventilation or inadequate airflow interfering with reaching set high temperature (medium)
- Incorrect pyrolysis settings or calibration issues (low)
How to Fix Error E10
DIY Fix Basic checks and reset
- Ensure the oven is empty and cool before attempting any self-clean cycle
- Verify that vents and exhaust areas are unobstructed
- Power cycle the oven: turn off at the breaker or unplug, wait ~10 minutes, then restore power and retry the self-clean cycle according to manual instructions
Technician Only Diagnose and replace safety thermostat if needed
- Disconnect power to the oven
- Access internal safety thermostat and temperature sensors according to model service manual
- Test thermostat continuity and function at high temperature range
- Replace thermostat with correct Asko-specified part if faulty
- Verify calibration and proper operation of pyrolysis cycle after replacement
Parts needed: Safety thermostat, Temperature sensors
- If ERR10 persists after basic user resets and there are signs of overheating, door lock issues, or abnormal smells
- If internal access or component testing is required beyond basic user checks — hire qualified technician
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
- Typical part-only price
- $15 - $40
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | ASKO 8041001 |
| voltage_rating | 240V AC |
Common Questions
What does E10 error mean on asko oven?
E10 error indicates a Pyrolysis Temperature Error during the self-cleaning cycle, preventing the oven from reaching high temperatures.
Can I fix asko oven E10 error myself?
Yes, you can perform basic checks such as ensuring the oven is cool, unobstructed vents, and power cycling the oven.
How much does it cost to fix E10 error?
Repairing the E10 error typically costs between $150 and $350, including parts and labor.
When should I call a technician for E10?
Call a technician if the E10 error persists after resets, or if you notice overheating, door lock issues, or unusual smells.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!