Asko Oven Error E06
⚡ Quick Answer: The E06 error code on your Asko oven indicates that a touch key on the control panel may be stuck or unresponsive, disrupting the oven's normal operat... ✅ DIY Fixable
What Does Error E06 Mean?
The E06 error code on your Asko oven indicates that a touch key on the control panel may be stuck or unresponsive, disrupting the oven's normal operation. Symptoms include the E06 error message on the display, unresponsiveness to settings, and the oven fan running continuously. To troubleshoot, try resetting the oven by disconnecting it from power for at least 30 minutes before reconnecting and attempting to reset the clock or initiate a simple bake cycle.
Common Symptoms:
- Error 06/E06 shown on display
- Oven unresponsive to settings
- Oven fan running/blowing continuously (reported in community case)
Possible Causes
- Dirt
- Electronic glitch
- Component wear
- Wiring connection
How to Fix Error E06
DIY Fix Basic checks and reset
- Turn off the oven and disconnect power at the mains or circuit breaker
- Wait at least 30 minutes to allow cooling and discharge of electronics
- Reconnect power and attempt to reset by setting the clock or a simple bake cycle
Technician Only Inspect temperature and safety sensors
- Disconnect power and remove necessary panels to access oven internal sensors
- Check oven temperature sensor (NTC) connections and resistance per Asko specifications
- Check high-limit thermostat/thermal cut-out for proper function
- Verify cooling fan operation and wiring continuity
Parts needed: Temperature sensor (NTC), High-limit thermostat/thermal cut-out, Cooling fan motor and wiring
- If error persists after power reset and basic cooling period
- If oven shows signs of overheating or unusual smells/heat
- If internal diagnostics or part testing is beyond safe user capability
Next step
Choose the next step for E06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Cooling Fan Motor
Moves cooling air around hot cooking components and electronic controls.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| Tool | Multimeter/Screwdriver |
|---|---|
| Type | Electrical |
| Action | Clean |
| Component | UI |
Common Questions
What does E06 error mean on asko oven?
The E06 error indicates a potential issue with a stuck or unresponsive touch key on the control panel.
Can I fix asko oven E06 error myself?
Yes, you can try resetting the oven by disconnecting it from power for at least 30 minutes.
How much does it cost to fix E06 error?
Estimated repair costs range from $100 to $350, depending on parts and labor.
When should I call a technician for E06?
Call a technician if the error persists after a reset or if you notice signs of overheating or unusual smells.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!