Ariston Washing Machine Error F13
⚡ Quick Answer: The F13 error code on Ariston washing machines indicates a malfunction in the temperature sensor or the drying temperature circuit. This issue often o... ⚠️ Difficulty Varies
What Does Error F13 Mean?
The F13 error code on Ariston washing machines indicates a malfunction in the temperature sensor or the drying temperature circuit. This issue often occurs during the start or drying cycle, resulting in the drying function failing to start or stopping prematurely. The door may remain locked, and the machine may display blinking LEDs, signaling a fault in the temperature sensor circuit. A faulty NTC thermistor or damaged wiring can lead to this problem.
Common Symptoms:
- Error appears at start or during drying cycle
- Drying function fails to start or stops prematurely
- Machine may pause and display F13, or blink LEDs in specific patterns indicating temperature sensor circuit fault
Possible Causes
- Faulty dryer temperature sensor (NTC) or thermistor (medium)
- Loose or damaged wiring/connector for temperature sensor (medium)
How to Fix Error F13
DIY Fix Basic reset and observation
- Unplug the washing machine from power.
- Wait about 10–20 minutes to allow the control board to reset.
- Plug the machine back in and attempt to run a cycle to see if the error recurs.
Technician Only Inspect and replace temperature sensor and wiring
- Disconnect power to the unit.
- Access the dryer/temperature sensor area per service manual.
- Check resistance of temperature sensor (NTC); replace if open or shorted.
- Inspect wiring harness and connectors for damage or loose connections; repair as needed.
- Test operation after parts replacement.
Parts needed: Temperature sensor / NTC thermistor, Wiring harness and connectors
- Error persists after reset and basic checks
- User cannot safely access internal wiring or components
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | C00194799 |
| voltage_rating | 230V AC |
Common Questions
What does F13 error mean on ariston washing machine?
F13 indicates a malfunction in the temperature sensor or drying circuit, preventing the drying function from starting.
Can I fix ariston washing machine F13 error myself?
Yes, you can try a basic reset by unplugging the machine for 10-20 minutes, then plugging it back in.
How much does it cost to fix F13 error?
Repair costs range from $30 to $120 for parts, while labor costs may vary.
When should I call a technician for F13?
Call a technician if the error persists after a reset or if you cannot safely access internal components.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!