Ariston Washing Machine Error F08
⚡ Quick Answer: The F08 error code on Ariston washing machines indicates a heating-related fault, typically due to a malfunction in the heating circuit. This may invo... ✅ DIY Fixable
What Does Error F08 Mean?
The F08 error code on Ariston washing machines indicates a heating-related fault, typically due to a malfunction in the heating circuit. This may involve the heating element, temperature sensor, or control board relay. Users may notice that the machine stops shortly after starting a program, or the error can arise during wash, rinse, or spin cycles. Addressing this issue may require checking wiring connections or replacing faulty components.
Common Symptoms:
- Machine stops shortly after program start and displays F08
- Error appears during wash, rinse or spin cycles
- Indicators light patterns corresponding to F08 (varies by model)
Possible Causes
- Heating element failure or open circuit in heating circuit (medium)
- Faulty temperature sensor (NTC) in the heating circuit (medium)
- Pressure/level switch malfunction causing incorrect water level sensing (low)
- Control board heating relay or related control electronics fault (low)
How to Fix Error F08
DIY Fix Basic user troubleshooting steps
- Disconnect the washing machine from power for several minutes and reconnect to attempt a reset
- Check for simple issues like visibly loose external connectors when unplugged
Technician Only Technician diagnostic and repair
- Test resistance of heating element and temperature sensor with a multimeter
- Inspect and test the wiring harness and connectors in the heating circuit
- Check pressure switch function and replace if faulty
- Inspect control board heater relay circuit and repair/replace as needed
Parts needed: heating element, temperature sensor (NTC), pressure/level switch, wiring harness, control board/heater relay
- If multimeter tests show faults in heating element or sensor
- If wiring or control board faults are suspected
- If pressure switch is malfunctioning
Next step
Choose the next step for F08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F08 error mean on ariston washing machine?
F08 error indicates a heating circuit fault, often linked to the heating element or temperature sensor.
Can I fix ariston washing machine F08 error myself?
Yes, you can try basic troubleshooting like resetting the machine or checking connections.
How much does it cost to fix F08 error?
Repair costs range from $50 to $300+, depending on the parts that need replacement and labor.
When should I call a technician for F08?
Call a technician if multimeter tests show issues with the heating element or sensor, or if control board faults are suspected.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!