Ariston Washing Machine Error 5
⚡ Quick Answer: The Ariston washing machine error 5 indicates a drainage malfunction, preventing the machine from properly draining water at the end of a cycle. Commo... ✅ DIY Fixable
What Does Error 5 Mean?
The Ariston washing machine error 5 indicates a drainage malfunction, preventing the machine from properly draining water at the end of a cycle. Common symptoms include water remaining in the drum, cycle interruptions before rinse or spin, and the display showing F05/F5. This issue often results from a clogged drain filter or hose, a malfunctioning drain pump, or a faulty pressure switch.
Common Symptoms:
- Water remains in the drum at end of cycle
- Cycle stops or pauses before rinse/spin
- Display shows F05/F5 or LEDs flash corresponding to the error
- Audible change (e.g., no pump noise during drain phase)
Possible Causes
- Clogged drain filter or drain hose (medium)
- Malfunctioning or blocked drain pump (medium)
- Faulty level pressure switch or sensor reading (medium)
How to Fix Error 5
DIY Fix Check and clear drain filter
- Turn off and unplug the washing machine.
- Locate the drain filter access panel at the bottom front of the machine.
- Place a shallow tray and towels to catch water.
- Unscrew and remove the filter, then clean out debris.
- Replace the filter securely and run a drain/spin cycle to test.
DIY Fix Inspect and straighten drain hose
- Unplug the washing machine.
- Move the machine to access the drain hose at the back.
- Ensure the hose is free from kinks, bends, or visible blockage.
- Disconnect the hose and flush with water to clear any internal blockages.
- Reconnect the hose securely and test the machine.
Technician Only Test and service drain pump and pressure switch
- Disconnect power and open the machine’s service panel.
- Use a multimeter to test continuity on the drain pump and level pressure switch.
- Inspect and repair/replace the pump if the impeller is jammed or motor windings are faulty.
- Check pressure hose and sensor for obstructions or failure.
- Reassemble and validate repairs with a full cycle test.
Parts needed: Drain pump assembly, Pressure (level) switch, Pressure hose
- After attempting user‑level actions, if the error persists.
- If you are uncomfortable accessing internal components or diagnosing electrical parts.
- If multimeter tests indicate electrical faults in the pump or pressure switch.
Next step
Choose the next step for 5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | C00310363 |
| voltage_rating | 230V AC |
Common Questions
What does 5 error mean on ariston washing machine?
Error 5 indicates a drainage issue, often with water remaining in the drum and the display showing F05/F5.
Can I fix ariston washing machine 5 error myself?
Yes, you can check and clear the drain filter and inspect the drain hose for blockages.
How much does it cost to fix 5 error?
Repair costs range from €50 to €180, depending on parts and labor in your region.
When should I call a technician for 5?
Call a technician if the error persists after user actions or if you're uncomfortable with DIY repairs.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!