Ariston Washing Machine Error 2

⚡ Quick Answer: The Ariston washing machine error code 2 indicates a failure in the door lock mechanism, preventing the machine from starting. This issue may also ste... ✅ DIY Fixable

What Does Error 2 Mean?

The Ariston washing machine error code 2 indicates a failure in the door lock mechanism, preventing the machine from starting. This issue may also stem from a fault in the motor or tachometer circuit, leading to symptoms like the drum not spinning, intermittent spinning, or the machine filling with water but then stopping. Clicking sounds from the motor area may also be present.

Common Symptoms:

  • Error appears at start of cycle or during spin
  • Drum does not spin or spins intermittently
  • Machine may fill with water, click, then stop
  • Sometimes accompanied by clicking sounds from motor area

Possible Causes

  • Faulty tachometer or tachogenerator signal loss (medium)
  • Motor blockage or worn brushes (on commutator motor models) (medium)
  • Loose or damaged wiring/connectors between motor and control board (medium)

How to Fix Error 2

DIY Fix Basic checks before service

  1. Turn off and unplug the washing machine for 10–15 minutes to reset the control electronics.
  2. Ensure the drum can turn freely by hand (no obstructions like small objects stuck between drum and tub).
  3. Check that the door is fully closed and latched before restarting the machine.

Technician Only Inspect and repair motor/tachometer circuit

  1. Remove rear access panel to access the motor and tachometer assembly.
  2. Inspect and measure the tachometer (tachogenerator) resistance and signal integrity; replace if out of specification.
  3. Check motor brushes (if present) for wear; replace brushes if worn beyond service limits.
  4. Verify and secure wiring harness connectors between the motor, tachometer, and control board.
  5. If wiring and sensors are good but error persists, consider control board diagnostics or replacement of related driver components.

Parts needed: Tachometer / Hall sensor, Motor brushes (if applicable), Wiring harness / connectors, Control board components (if necessary)

🛑 When to Call a Pro:
  • If the drum does not rotate freely by hand before power is applied.
  • If electrical diagnostics are required (e.g., resistance measurements) and you are not experienced.
  • If opening the machine voids warranty or safety compliance is a concern.

Technical Specifications

wattage N/A
component Door Lock Mechanism
resistance N/A
part_number 123456789
voltage_rating 230V AC

Common Questions

What does 2 error mean on ariston washing machine?

Error 2 indicates a door lock failure or a motor/tachometer issue, preventing the machine from starting.

Can I fix ariston washing machine 2 error myself?

Yes, you can perform basic checks like resetting the machine, ensuring the drum turns freely, and confirming the door is latched.

How much does it cost to fix 2 error?

Repair costs vary; expect moderate expenses for tachometer or motor work, higher if control board issues arise.

When should I call a technician for 2?

Call a technician if the drum doesn't rotate freely, if you need electrical diagnostics, or if warranty concerns exist.

Sources & References

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!