Ariston Oven Error F13
⚡ Quick Answer: The Ariston oven F13 error code indicates a malfunction within the temperature sensing system, often linked to faults with the meat probe or the self-... ✅ DIY Fixable
What Does Error F13 Mean?
The Ariston oven F13 error code indicates a malfunction within the temperature sensing system, often linked to faults with the meat probe or the self-cleaning temperature and safety mechanisms. Symptoms include unexpected cooking cycle interruptions and abnormal temperature readings. This issue can arise from a faulty or incorrectly connected meat probe or accessory sensor, necessitating thorough inspection and potential replacement.
Common Symptoms:
- Error displayed when cooking or self‑clean cycle is running
- Cooking or pyrolytic self‑clean cycle stops unexpectedly
- Temperature readings abnormal or unavailable
Possible Causes
- Faulty or improperly connected meat probe or accessory temperature sensor (medium)
- Pyrolytic self‑cleaning temperature or safety system fault (low)
How to Fix Error F13
DIY Fix Basic checks and reset
- Turn off oven and disconnect from power for at least 1–2 minutes
- If your model uses a meat probe or accessory temperature sensor, unplug it and inspect the connector for dirt, corrosion, or damage
- Reconnect and power on to see if the F13 clears
Technician Only Inspect and replace sensor or probe components
- Disconnect power to the oven
- Visually inspect the meat probe sensor and its wiring harness for breaks, kinks or burnt spots
- Test the probe resistance with a multimeter against manufacturer specifications
- If faulty, replace the meat probe or sensor assembly
- If the probe and wiring are good but F13 persists, test associated temperature circuitry and safety interlocks in the oven control board
- Repair or replace defective components as needed
Parts needed: Meat probe/temperature sensor, Wiring harness/connectors, Control board if sensor circuitry fault confirmed
- If F13 persists after basic user checks
- If you are uncomfortable performing multimeter testing or internal inspections
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F13 error mean on Ariston oven?
F13 indicates a temperature sensor malfunction, causing erratic cooking temperatures and unexpected cycle interruptions.
Can I fix Ariston oven F13 error myself?
Yes, you can perform basic checks like resetting the oven and inspecting the meat probe or sensor connections.
How much does it cost to fix F13 error?
Repair costs range from $30 to $250+, depending on the specific parts and labor involved.
When should I call a technician for F13?
Contact a technician if the F13 error persists after your checks or if you're uncomfortable with internal inspections.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!