Ariston Dryer Error F12
⚡ Quick Answer: The Ariston dryer error F12 indicates a communication error between the display/user interface board and the main control board. This malfunction ofte... ⚠️ Difficulty Varies
What Does Error F12 Mean?
The Ariston dryer error F12 indicates a communication error between the display/user interface board and the main control board. This malfunction often results in the dryer not starting, with symptoms such as flashing lights on the control panel and an unresponsive interface. To resolve this issue, check for loose or damaged connections and consider the possibility of faulty control boards.
Common Symptoms:
- Dryer will not start and displays F12
- Some lights or indicators may flash when attempting to start
- Control panel becomes unresponsive
Possible Causes
- Loose or damaged communication harness between display board and main control board (medium)
- Faulty display/user interface control board (medium)
- Faulty main control board (PCB) (medium)
How to Fix Error F12
DIY Fix Check basic connections and power cycle
- Unplug the dryer from power and wait 5–10 minutes.
- Plug the dryer back in and attempt to run a cycle.
- If the error persists, ensure the dryer is disconnected before further inspection.
Technician Only Inspect and repair internal communication circuit
- Disconnect power and remove the dryer’s control panel cover.
- Inspect the communication harness between the display board and main PCB for looseness, corrosion, or damage.
- Secure or replace damaged harness/connectors.
- Test the display board and main control board with known-good parts if available to isolate the faulty board.
- Replace the defective board if needed.
Parts needed: Display/User Interface PCB, Main Control PCB, Communication harness/wiring
- If the dryer’s internal panels must be opened but you are not experienced with appliance electronics
- If repairing or replacing control boards is necessary
Next step
Choose the next step for F12
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | C00274347 |
| voltage_rating | 230V AC |
Common Questions
What does F12 error mean on ariston dryer?
F12 indicates a communication error between the display board and the main control board, preventing the dryer from starting.
Can I fix ariston dryer F12 error myself?
Yes, you can check connections and power cycle the dryer, but further inspection may require professional help.
How much does it cost to fix F12 error?
The estimated repair cost for the F12 error ranges from ¥10,000 to ¥40,000, depending on the necessary parts.
When should I call a technician for F12?
Call a technician if you need to open the internal panels or if control board repairs or replacements are required.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!