Ariston Dishwasher Error F13
⚡ Quick Answer: The Ariston dishwasher error F13 indicates a drainage issue, often manifesting as the dishwasher stopping mid-cycle and displaying a flashing F13 on t... ✅ DIY Fixable
What Does Error F13 Mean?
The Ariston dishwasher error F13 indicates a drainage issue, often manifesting as the dishwasher stopping mid-cycle and displaying a flashing F13 on the control panel. This error can be caused by a problem with the water supply or inlet valve, loose wiring or a fault in the main control board, or issues with the temperature sensor or heating circuit. Addressing these underlying causes is essential for restoring normal operation.
Common Symptoms:
- Dishwasher stops mid‑cycle
- F13 displayed/flashing on control panel
- Possible failure to heat or fill with water
Possible Causes
- Water supply or inlet valve issue (medium)
- Loose wiring or main control board fault (medium)
- Temperature sensor or heating circuit malfunction (low)
How to Fix Error F13
DIY Fix Basic checks for water supply and error reset
- Ensure the water tap feeding the dishwasher is fully open.
- Inspect inlet hose for kinks, blockages, or improper connection.
- Turn off power to the dishwasher for ~10 minutes, then restore to clear transient faults.
Technician Only Diagnose wiring, control board, and component faults
- Check continuity and secure connections of wiring harness between inlet valve, sensors, and control board.
- Test inlet water valve function and replace if faulty.
- Test or replace main control board if wiring checks good but fault persists.
Parts needed: inlet water valve, wiring harness, control board
- If multiple causes are suspected simultaneously
- If opening the unit voids warranty or involves complex electronics
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F13 error mean on ariston dishwasher?
F13 indicates a drainage issue, with symptoms like mid-cycle stops and a flashing error code.
Can I fix ariston dishwasher F13 error myself?
Yes, check the water supply, inspect hoses, and reset the dishwasher by turning it off for 10 minutes.
How much does it cost to fix F13 error?
Estimated repair costs range from $100 to $400+, depending on the parts and service needed.
When should I call a technician for F13?
Call a technician if multiple issues are suspected or if repairs may void your warranty.
Sources & References
- Ariston Dishwasher Problems And Troubleshooting (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!