Arcelik Washing Machine Error E10
⚡ Quick Answer: The E10 error code on your Arcelik washing machine indicates a problem with water intake, preventing the machine from filling with water. This issue m... ✅ DIY Fixable
What Does Error E10 Mean?
The E10 error code on your Arcelik washing machine indicates a problem with water intake, preventing the machine from filling with water. This issue may arise from insufficient water supply, pressure, or flow problems. Common symptoms include the machine stopping shortly after starting and the error code being displayed on the panel.
Common Symptoms:
- Machine stops shortly after start
- No water entering drum
- Error code E10 displayed on panel
Possible Causes
- Insufficient water supply to the washing machine (medium)
How to Fix Error E10
DIY Fix Check water supply and hoses
- Ensure the water tap supplying the machine is fully open.
- Inspect the water inlet hose for kinks, bends, or visible blockages.
- Turn off water, disconnect inlet hose, and check/clean small mesh filters at hose connections.
Technician Only Test and replace inlet components
- Measure water pressure at the machine inlet to verify adequate supply.
- Test continuity and operation of the water inlet valve; replace if defective.
- Inspect water level/pressure sensor and its wiring; replace faulty sensor.
- Check wiring to control board for communication errors related to water intake detection.
Parts needed: water inlet valve, water pressure/level sensor, inlet hose and filters
- If water supply is confirmed adequate but E10 persists after basic checks
- If testing/replacement of inlet valve or sensor is required
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E10 error mean on arcelik washing machine?
E10 error indicates a water intake problem, preventing the machine from filling.
Can I fix arcelik washing machine E10 error myself?
Yes, check the water supply, hoses, and clean filters for blockages.
How much does it cost to fix E10 error?
Repair costs range from $50 to $250, including parts and labor.
When should I call a technician for E10?
Call a technician if the E10 persists after checking water supply and hoses.
Sources & References
- Arçelik Çamaşır Makinesi E10 Hatası Çözümü – Garanti (community)
- Arçelik Çamaşır Makinesi E10 Hatası Nedir? (community)
- Arçelik Çamaşır Makinesi E10 Hata Kodu (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!