Amana Microwave Error DEMO

⚡ Quick Answer: The Amana microwave error code DEMO indicates that the appliance is in Demo Mode, a non-functional setting that disables all cooking functions. While ... ✅ DIY Fixable

What Does Error DEMO Mean?

The Amana microwave error code DEMO indicates that the appliance is in Demo Mode, a non-functional setting that disables all cooking functions. While the microwave powers on and buttons appear responsive, it does not heat food. The fan, lights, and turntable may operate, but without any heating capability. This mode is typically used for display or training purposes.

Common Symptoms:

  • Microwave powers on but does not heat food
  • Buttons and controls appear responsive but cooking does not start
  • Display shows 'DEMO' or similar indication
  • Fan and lights may run and turntable may rotate without heating

Possible Causes

  • Demo Mode intentionally enabled (high)

How to Fix Error DEMO

DIY Fix Disable Demo Mode

  1. Ensure microwave is in standby/off state.
  2. Use your model’s specific procedure to exit Demo Mode — commonly: hold the 'Timer Off' or '3' keypad for several seconds until 'd' or 'DEMO' appears/disappears, then press Start to confirm.
  3. If your model has menu navigation, locate the Demo Mode toggle and set it to 'OFF'.
  4. After disabling, test normal cooking by heating a cup of water.

Technician Only Verify Control Functionality and Firmware

  1. If Demo Mode cannot be exited via documented steps, confirm the control board firmware supports Demo Mode toggling.
  2. Check for stuck buttons or faulty touchpad inputs that may inadvertently trigger Demo Mode.
  3. Inspect the user interface board for damage.

Parts needed: Control panel or touchpad, Main control board

🛑 When to Call a Pro:
  • If you cannot exit Demo Mode using documented procedures and normal operation cannot be restored, contact authorized service.
  • If control panel or display appears unresponsive or shows additional error codes beyond Demo Mode.

Technical Specifications

wattage 1000W
component Control Panel
resistance
part_number
voltage_rating 120V AC

Common Questions

What does DEMO error mean on amana microwave?

The DEMO error indicates the microwave is in Demo Mode, disabling cooking functions and preventing food heating.

Can I fix amana microwave DEMO error myself?

Yes, you can disable Demo Mode by following your model's specific procedure, typically involving holding the 'Timer Off' or '3' button.

How much does it cost to fix DEMO error?

Repair costs range from $0–$150 for a touchpad replacement to $100–$300+ for a main control board.

When should I call a technician for DEMO?

Call a technician if you cannot exit Demo Mode or if the control panel shows unresponsive behavior or other error codes.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!