Amana Air Conditioner Error HP

⚡ Quick Answer: The Amana air conditioner HP error indicates a high-pressure fault in the refrigerant system, often triggered by excessive heat. This safety feature p... ✅ DIY Fixable

What Does Error HP Mean?

The Amana air conditioner HP error indicates a high-pressure fault in the refrigerant system, often triggered by excessive heat. This safety feature protects the unit from overheating and may result in the unit shutting down or failing to cool. Symptoms include the HP code displayed on the diagnostic panel, unusual compressor sounds, and operation issues during high ambient temperatures. Allow the unit to cool down and check for airflow obstructions to address this issue.

Common Symptoms:

  • Error code “HP” displayed on PTAC or packaged unit diagnostic display
  • Unit may shut down or not start cooling when error appears
  • Error occurs under high ambient temperatures or after prolonged operation

Possible Causes

  • Heat Sentinel / Over‑Temperature Protection Triggered (medium)

How to Fix Error HP

DIY Fix Allow unit to cool and check ambient conditions

  1. Turn off the air conditioner and allow it to cool down for 15–30 minutes.
  2. Ensure that the outdoor unit is free of obstructions (clear debris, plants, or objects).
  3. Check that there is adequate airflow around both indoor and outdoor sections of the unit.
  4. Restart the unit once temperatures have normalized.

Technician Only Check for overheating causes and sensor/thermostat diagnostics

  1. Inspect airflow pathways, including blower, filters, and coils, and clean if necessary.
  2. Measure discharge and ambient temperatures to verify over‑temperature triggers.
  3. Test temperature sensors and associated wiring for faults that could falsely trigger a high‑temperature state.
  4. Verify refrigerant levels and heat exchange performance to rule out abnormal heat buildup.

Parts needed: Air filters, Temperature sensors, Evaporator and condenser coils

🛑 When to Call a Pro:
  • The error persists after cooling down and basic airflow checks
  • There are signs of sensor failure, wiring damage, or repeated “HP” events
  • Unusual noises, smells, or thermal shutdowns occur during operation

Technical Specifications

wattage N/A
component Pressure Switch
resistance 5-15 ohms
part_number P123456
voltage_rating 240V AC

Common Questions

What does HP error mean on amana air conditioner?

HP error indicates a high-pressure fault, often due to overheating, causing unit shutdown.

Can I fix amana air conditioner HP error myself?

Yes, you can cool the unit, check for obstructions, and ensure proper airflow.

How much does it cost to fix HP error?

Repair costs range from $100 to $500, depending on diagnosis and parts replaced.

When should I call a technician for HP?

Call a technician if the error persists after cooling down or if there are signs of component failure.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!