AEG Oven Error E10

⚡ Quick Answer: The E10 error code on AEG ovens indicates a potential malfunction in the heating element, which may result in the display showing no heat or inconsist... ✅ DIY Fixable

What Does Error E10 Mean?

The E10 error code on AEG ovens indicates a potential malfunction in the heating element, which may result in the display showing no heat or inconsistent temperature. If you encounter this issue, it is essential to first verify the model-specific documentation for any definitions related to E10 and perform a power cycle by turning off the oven and disconnecting it from the mains for a few minutes. Ensure that the oven door is fully closed and that the controls are correctly set before attempting to use it again.

Possible Causes

  • Heating Element
  • Temperature Sensor
  • Control Board

How to Fix Error E10

DIY Fix Verify model‑specific documentation and restart the oven

  1. Locate and consult the exact user manual for your specific AEG oven model to see if E10 is defined there.
  2. Turn the oven off and disconnect it from the mains power for a few minutes, then reconnect and power it on to see if the code persists.
  3. Check basic conditions: ensure the door is fully closed and oven controls are set correctly.
🛑 When to Call a Pro:
  • If the E10 error continues after power cycling and consulting the model’s official manual, stop using the oven and contact AEG support or an authorized technician.

Next step

Choose the next step for E10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Heating Element

Heats the water or air inside the appliance to the required temperature.

Typical part-only price
$40 - $95
DIY difficulty
Medium
Estimated time
30-45 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

$15 - $35 · Easy · 15-30 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 2000W
component Heating Element
resistance 10-30 ohms
part_number AEG 5020000000
voltage_rating 230V AC

Common Questions

What does E10 error mean on AEG oven?

E10 error on AEG ovens suggests a malfunction in the heating element, often leading to no heat or inconsistent temperature.

Can I fix AEG oven E10 error myself?

Yes, you can attempt to fix it by consulting your model's manual, power cycling the oven, and ensuring the door is closed properly.

How much does it cost to fix E10 error?

Repair costs for the E10 error can vary widely depending on the model and region.

When should I call a technician for E10?

Contact a technician if the E10 error persists after power cycling and checking the manual.

Sources & References

Data last verified: 2026-07-26

User Comments (0)

Share your experience or solution below.

Be the first to comment!