AEG Microwave Error E15

⚡ Quick Answer: The AEG microwave error code E15 indicates an overheating condition within the oven cavity. This error typically appears during or after use and is ac... ✅ DIY Fixable

What Does Error E15 Mean?

The AEG microwave error code E15 indicates an overheating condition within the oven cavity. This error typically appears during or after use and is accompanied by the microwave stopping operation until it cools down. To resolve this issue, it's essential to allow the appliance to cool for 10-20 minutes. If the error persists after cooling or if there are signs of burning smells or unusual noises, further inspection of the ventilation and thermal components may be necessary.

Common Symptoms:

  • Error E15 appears on display during or after use
  • Microwave stops operation until it cools down
  • Code clears after cooling and restarting

Possible Causes

  • Internal temperature of the microwave cavity is above safe operating limit (high)

How to Fix Error E15

DIY Fix Allow the microwave to cool down

  1. Stop the current operation immediately.
  2. Open the microwave door to help dissipate heat.
  3. Wait at least 10–20 minutes for internal components to cool.
  4. Once cool, close the door and attempt to restart the desired function.

Technician Only Inspect ventilation and thermostat/thermal cut‑out components

  1. Disconnect power and allow the unit to cool.
  2. Verify that all vents and airflow paths are clear of obstructions or debris.
  3. Test the temperature sensors and thermal cut‑out switches for correct operation using appropriate diagnostic tools.
  4. Replace defective sensors or thermostats if they do not meet manufacturer specifications.

Parts needed: Temperature sensor/thermostat, Thermal cut‑out switch, Ventilation channels

🛑 When to Call a Pro:
  • If E15 persists after adequate cooldown and cannot be cleared by restarting
  • If excessive internal heat is accompanied by burning smells, unusual noises, or visible damage
  • If airflow/ventilation is restricted but cannot be resolved without opening the unit

Next step

Choose the next step for E15

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Thermostat

Regulates temperature by turning the heating or cooling system on or off.

$15 - $40 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Microwave parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E15 error mean on AEG microwave?

E15 error indicates the microwave is overheating, causing it to stop operation.

Can I fix AEG microwave E15 error myself?

Yes, allow the microwave to cool down for 10-20 minutes to clear the error.

How much does it cost to fix E15 error?

Repair costs typically range from $50 to $200 for parts and labor.

When should I call a technician for E15?

Call a technician if E15 persists after cooling or if there are burning smells or unusual noises.

Sources & References

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!