Admiral Oven Error F2
⚡ Quick Answer: The Admiral oven F2 error signifies an over-temperature condition detected by the temperature sensor, which can lead to inaccurate temperature reading... ✅ DIY Fixable
What Does Error F2 Mean?
The Admiral oven F2 error signifies an over-temperature condition detected by the temperature sensor, which can lead to inaccurate temperature readings or the oven failing to heat properly. This issue may stem from a faulty temperature sensor, a defective relay board, or control circuitry. Immediate troubleshooting steps include resetting the oven and ensuring proper ventilation. If the error persists, further inspection and repair of the oven temperature sensor or relay board may be required.
Common Symptoms:
- Oven display shows F2 error during or after heating cycle
- Oven may shut down heating prematurely or refuse to heat
- Temperature regulation is inaccurate or oven overheats
Possible Causes
- Oven temperature too hot (over-temperature detected) (high)
- Faulty oven temperature sensor (RTD) (medium)
- Defective relay or control circuit related to temperature regulation (medium)
How to Fix Error F2
DIY Fix Reset Oven and Check Basic Conditions
- Turn off the oven and disconnect power at the breaker or unplug for 5–10 minutes
- Reconnect power and observe if F2 reappears
- Ensure oven vents are not blocked and oven has cooled before restarting
Technician Only Inspect and Test Temperature Sensor
- Disconnect oven power
- Access the oven temperature sensor (usually located at the back wall of the oven)
- Test sensor resistance with a multimeter (compare to expected values)
- Replace sensor if readings are out of specification
Parts needed: oven temperature sensor (RTD)
Technician Only Check and Replace Relay or Control Board if Needed
- Disconnect oven power
- Inspect relay board and control board for signs of damage or overheating
- Test and replace the relay board or control board if defective
Parts needed: relay board, control board
- If error persists after basic resets and user checks
- If temperature sensor tests within normal range but error still appears
- If control board or relay replacement is required
Next step
Choose the next step for F2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1200 ohms |
| part_number | ADMO-SENSOR-001 |
| voltage_rating | 120V AC |
Common Questions
What does F2 error mean on Admiral oven?
F2 indicates the oven temperature is too hot, leading to erratic heating and inaccurate temperature regulation.
Can I fix Admiral oven F2 error myself?
Yes, you can reset the oven and check basic conditions, such as ensuring vents are clear.
How much does it cost to fix F2 error?
Repair costs range from $40–$150 for the temperature sensor, plus labor.
When should I call a technician for F2?
Call if the error persists after basic resets or if further repairs to the sensor or control board are needed.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!