Admiral Oven Error E06
⚡ Quick Answer: The Admiral Oven E06 error indicates a broiler circuit fault, often due to the broiler element failing to reach the desired temperature. This can lead... ✅ DIY Fixable
What Does Error E06 Mean?
The Admiral Oven E06 error indicates a broiler circuit fault, often due to the broiler element failing to reach the desired temperature. This can lead to the broiler not heating when selected, and the error typically arises when broil mode is activated. Visible damage to the broiler element or issues with electrical connections might also contribute to this error, resulting in inconsistent cooking results.
Common Symptoms:
- Broiler does not heat when selected
- Error appears when broil mode is initiated
- Broiler element may show visible damage or lack continuity
Possible Causes
- Broiler element failure or fault (medium)
- Electrical connection issue to broiler element (medium)
How to Fix Error E06
DIY Fix Basic checks for E06 before calling service
- Turn the oven off and allow it to cool fully
- Visually inspect the broiler element for cracks, breaks, or blistering
- Check that the broiler element connections at the oven’s terminal block are secure (power must be off)
- Try running a simple broil cycle again to see if the error persists
Technician Only Technician-level diagnosis and repair for broiler fault
- Disconnect power at the breaker
- Test broiler element continuity with a multimeter; if open or out of spec, replace the element
- Inspect wiring harness and connections for damage or corrosion and repair as needed
- If element and wiring are good, test control board’s broil circuit output and replace control board if defective
Parts needed: Broiler heating element, Wiring harness/connectors, Control board (if circuit fault present)
- If the error persists after basic visual and continuity checks
- If you are uncomfortable working with internal oven components or electrical testing
Next step
Choose the next step for E06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Oven Temperature Sensor |
| resistance | 1000-1200 ohms |
| part_number | ADMO-SENSOR-001 |
| voltage_rating | 120V AC |
Common Questions
What does E06 error mean on Admiral Oven?
E06 indicates a broiler circuit fault, often due to a failing broiler element that doesn't heat.
Can I fix Admiral Oven E06 error myself?
Yes, you can check the broiler element for damage and ensure connections are secure.
How much does it cost to fix E06 error?
$80-$350 for broiler element replacement; control board repair may cost more.
When should I call a technician for E06?
Call a technician if the error persists after checks or if you're uncomfortable with repairs.
Sources & References
- Range/Oven Fault Codes Guide (Admiral) (community)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!